When it comes to selecting hollow steel bar for your building projects, there are a number of factors you need to consider. By no means is this a quick and easy process. There are a variety of hollow bar sizes available for any given project.
If you plan on using hollow bar equipment for anything besides industrial applications then you will want to consider the strength of the hollow bar. If you are going to be using it for the sole purpose of building and strengthening wooden structures such as house siding, the strength is going to be critical. Most hollow steel bars for residential purposes are going to be roughly 10 times weaker than those that are used for commercial applications. Make sense? Strength is critically important in a hollow bar for every application.
Also keep in mind that hollow steel bars do not lend themselves well to impact loads. For example, if your wood siding will be severely damaged by a falling object or just simply won’t withstand it, then do not use a steel bar of this size. Likewise, if you are going to be applying automotive sealant or paint to your vehicle, do not use a steel bar that is too small as you run the risk of weakening the bond between the coating and the steel. It just does not make sense.
Another important factor in deciding which steel bar sizes to use is what you are going to be using it for. Hollow steel bars come in various gauges. The gauge refers to the size of the hollow bar. Gauge number one is the weakest and the strongest.
You can use hollow steel bars of any gauge size, but there are a few things to consider when selecting which particular type of steel bar to use. First, the length of the bar has an effect on the stress it can handle before it becomes too brittle and breaks. For example, the bar four inches long will provide twice as much pressure as one inch long steel bar. This means that you should select a steel bar that is at least four inches long in order to get the best results.
Second, the diameter of a hollow bar directly affects its tensile strength. A smaller diameter hollow bar will be weaker than a larger size steel bar. Remember that a bigger diameter hollow bar of the same length will be weaker because of the added load the thinner bar creates with every compression cycle. The diameter of the bar will also affect the tensile strength. The more width between the bars the better.
Third, you should also consider the process you will be using the bar for before you decide which size is best for you. If you are looking for a heavy duty tool, then you might want to consider a hollow bar size four inches. However, if you plan on doing fine twisting and bending and a lot of lifting, then a small steel hollow bar of a smaller diameter works best.
You might want to measure out the hollow bar sizes you plan on buying to get an idea about what sizes to buy. If you buy too small a bar and it doesn’t perform up to your expectations, then you will have wasted money. On the other hand, if you buy too big a bar, you won’t be able to use it and will need to buy another one.
You can buy steel hollow bar sizes in a variety of different finishes including, brass, stainless steel, and black oxide. Each finish has its own unique look. Brass tends to look nice and brass bar sizes tend to be pretty uniform. Stainless steel has a nice brushed finish and stainless steel bar sizes are fairly durable and long lasting as well. Black oxide is a custom finish that gives the bar a unique color when it is finished giving it a unique look.
There are many advantages to using hollow bars. First, hollow bars allow you to customize the length and diameter, and they are easily made or ordered. They can be ordered through the internet or by contacting manufacturers directly. Most hollow bar sizes can hold a lot of weight, so if you need to lift a large object, you won’t have to worry about the strength of your bar. Some hollow bars can even support objects up to 400 pounds.
When choosing a hollow bar size, you should consider how much you are able to handle. If you are using this bar for industrial purposes, you may not be able to handle much extra weight. If you are just using the bar for lighter things, you can get by with a hollow bar size that will give you the flexibility you need. This allows you to get the extra use out of your hollow bar.